What Are Scupper Plugs? (And When Should You Use It?)
Scuppers are simply molded in-drain holes in sit-on-top kayaks. These vertical holes connect the boat deck to the water beneath it, and they may be in the cockpit, foot walls or tank well. There are typically between one and six scupper holes on a kayak. Scupper holes are good for draining water. Mar 23, · You see, most of the sit-on-top kayaks out there have these things called scupper holes. Specifically, they are studded in different parts of the deck of the boat. But most of the time, they are present in the rear tank and the cockpit. Of course, essentially, these holes are being placed so that water can be expelled anytime.
The truth is that scupper holes and plugs are there to help you. What is a scupper? Scuppers are kayxk molded in-drain holes in sit-on-top kayaks. These vertical holes connect the boat deck to the water beneath it, and they may be in the cockpit, foot walls or tank well.
There are typically between one and six scupper holes on a kayak. What does the name sami mean in arabic holes are good for draining water. Since the deck is the area that is above the water line, you may wht wondering why or how water gets on the deck.
It also comes in if the people inside the kayak are heavy enough to cause the hull to sit deeper in the water. That extra weight affects buoyancy and displacement, which allows the kayak to take on water.
Just like the scupper hole, a scupper plug is simple. They are a safety feature of sit-on-top kayaks, but their purpose is to plug up the kaysk drain hole. Designed only to fit the scupper holes, the plugs fill those openings to keep water from getting into the kayak during those times that your boat takes on extra water. Plugging scupprr openings could mean less water inside the yak. Put the plugs in harder for a tighter sscupper, and that could minimize water getting through. You may be paddling on flat water and have no need of plugs or enjoying a brisk ride on rougher water and find that you need them.
Want to know when we add new paddle spots?
Scupper holes, found in sit-on-top kayaks, are designed as a safety feature to drain water out of the kayak, from top to bottom, which keeps you from sitting in a puddle or even worse, making your kayak a bathtub full of water prone to capsizing. Feb 19, · The scupper plugs in kayaks help to close the holes so the water from the river, lake, or sea doesn’t hamper the balance. The scupper plugs maintain an ideal drainage system in a kayak. The Use of Scupper Plugs The scupper plugs are .
You see, most of the sit-on-top kayaks out there have these things called scupper holes. Specifically, they are studded in different parts of the deck of the boat. But most of the time, they are present in the rear tank and the cockpit.
Of course, essentially, these holes are being placed so that water can be expelled anytime. If you are an amateur boater, you would not pay that much attention to these holes. After all, if they are included in the overall design of the boat, you would immediately think that they are necessary.
But if that's the case, what's the purpose of these scupper plugs? By their nature, these components are designed to close or shut these holes. Are they needed in your boat? Well, I want to share some insights regarding this matter. I will let you understand the purpose of scupper holes and the perfect situations where you should use them. Let's get started. Just like I mentioned earlier, scupper holes are present on most sit-on-top kayaks.
They are there to ensure that the water that breaches in the boat will be siphoned out from top to bottom. This feature is extremely crucial to ensure that you are not sitting on the puddle. If not for these holes, there's a good chance that your boat will be flooded. At that time, there's a good chance that you will be capsized. Of course, surviving a flipped boat is a different skill set that you need to learn as well. Scupper plugs, on the other hand, are made to specifically fit on these scupper holes.
The function of these scupper plugs is to ensure that water will not come in. Typically, the latter happens in areas where the water is choppy. In some cases, water could come if there is enough load to sink the hull of the kayak deep enough. The water can automatically pervade the cockpit of your boat. At this point, it is already important that you know the overall capacity of your kayak.
It is quite a difficult thing if the water comes from below. Draining it is indeed a difficult task, especially if the flow is continuous. These are the very moments where there's a need for you to have scupper plugs. Once you have inserted those scupper plugs, your kayak will be a lot drier than it used to be. However, take into account that any water that comes inside the cockpit will not be drained automatically if these scupper plugs are present. In my experience, the best opportunity where you can use a scupper plug to your kayak is all the time.
I don't want excessive water in my boat. Most of the time, my feet don't like to feet wet or drenched, especially if the weather is cold. It just chills me out. On summer days, I can somehow tolerate the situation. But I always keep in mind that the cockpit of my kayak is not a bath. Therefore, I make sure that it is dry all the time.
Scupper plugs should be used if you are bringing a lot of load in the kayak or if you are kayaking with two or more people. Just like I said earlier, the heavier the kayak, the more it sinks. And when that happens, the scupper holes of your kayak will be submerged into the water.
That alone can cause unwanted water entry. To prevent this from happening, it is crucial that you have scupper plugs with you. If you are planning to go on a kayaking trip with your friends and families, you should secure these plugs to their designated scupper holes. Many people have already asked me this question. Some kayakers have this experience where the kayak is still watered even if the scupper plugs are installed already.
They always freak out whenever this situation happens. However, let me tell you that there's nothing here that you should worry. You see, the water that is coming from the plug is just minimal.
Therefore, it will never cause your boat to sink. You should just ignore this and just focus on the adventure. If you want, you can search for some of the best scupper plugs out there. However, the water is coming from waves and splashes of your water can become a threat, especially if they have accumulated long enough.
Also, make sure that you can inspect the structure of your boat before you let it thrust in the water. You don't want to be caught off guard by any holes while you are kayaking.
They are hazards that you can always avoid! Let us say that you don't want to remove the scupper plugs to drain the water out of your kayak.
If this is your intention, you need to use a bilge pump and sponge instead. They are the ones that can help you take out the water from the cockpit of your boat. In fact, I do recommend that you carry them in each of your water trips. They provide convenience and safety on your part. If you deem that the water in your boat is too much, just use these amenities to eliminate the intruder. They can make your kayaking adventure much more convenient. Whether you like it or not, water will always be a normal factor whenever you are kayaking or canoeing.
They are a part of the adventure already. If you can organize your boat properly, water entry will be minimized. Of course, the use of these scupper plugs will be helpful in this situation.
They can prevent any water breaches, especially if your sit-on-top kayak is overloaded. Once your boat is fully secured, the need for you to bail water from time to time will be reduced.
How to Remove Excessive Water? That's it for now. If you have questions or suggestions, drop them in the comment section. Please enter your comment!
Please enter your name here. You have entered an incorrect email address!