How to Transfer an Image onto Paper!
The good news is that you can transfer photocopy toner ink or laser-jet print ink from paper to almost any surface you like, including fabric, tile, metal, or paper. With the right preparation, you can transfer ink from paper in an afternoon. Step 1 Print a copy of the image you'd like to transfer on a laser-jet printer or photocopier. Mar 23, · Once printed I placed the image face down on my surface, taped the edges and rubbed the image, ink side down, with a flat edge. Peel back your parchment and your ink should remain on the surface. Allow to dry for about 10 minutes and seal using mod podge. I used this transfer on an easy DIY book holder for my zi255.comted Reading Time: 40 secs.
I love, love, love this technique for my Junk Journals how to transfer ink from paper to paper books. The best part of my technique is that it is FAST…no waiting overnight for things to dry.
Please come play with me in my Graphics Fairy sandbox and I will show you how easy this technique is. The best thing about this mixed media transfer technique is that you can continue working on your art piece immediately. There is no need to stop and wait for things to dry before adding more paint or layers of deliciousness. You have the flexibility to move right along.
That always makes this impatient artisan happy! How about you? I am working in an old book for this demonstration, but you can work on any paper surface. I did two versions to show you. The first image is trimmed into a rectangle close to the edge of the feather. See the trimmed images in the Materials section above. You can see in the image that I how to make game in notepad a little white paper halo around the entire image!
You will see that the final results are almost identical. Apply a good amount of Liquid Matte How to transfer ink from paper to paper to your page or paper. You need a smooth and even coat on the paper so that all areas of the image will adhere at the same speed.
I covered the entire page with medium so the surface looks the same. Move quickly because it can dry pretty fast. TIP : Too much of the medium can buckle some papers, so be a smart crafter and do a test on the paper before you begin.
It will be worth it! Quickly lay the image face down into the wet medium. Always scrape from the center on each stroke. Wipe any medium off the scraper after each swipe. It is a little more difficult to burnish the fussy cut image. Be careful with the wispy bits. Check your edges, especially on the fussy cut image. If any of the edges are not stuck down, apply more medium and burnish them down.
Wait 2 minutes. Please time it! Then slowly lift a corner or an edge. If you see any of the image sticking to the backing paper belowlay it back down and burnish it.
Wait another minute and lift a different area. When you see no part of the image sticking to the backing paper, begin to pull on a diagonal across the image. Sometimes you get lucky and a BIG chunk comes off.
The bottom image shows what the removed paper leaves behind. Once all the big pieces of paper are removed, begin to gently rub the surface with your finger. No water please. No how to make a hanging canopy to press hard here either. Take your time and apply even pressure to roll pieces of paper off. If your fingers are sensitive, you can use an old washcloth.
Just nothing wet! Continue until all visible paper is removed. It takes just a few minutes. It may still look hazy or cloudy. A top coat fixes that! Now that we have learned How to Transfer an Image onto Paper, you can seal or top coat the image transfer if you like.
I use Gel Medium for this in either Gloss or Matte. You can see an OOPS below the brush on the image below. I either missed applying the medium to an area of the page or I rubbed too hard. Good thing I am okay with a rustic look! Imperfections are perfectly fine in art. They often lead us down new paths of learning, plus they make our handmade Image Transfers onto Paper so much more interesting! The left book page Image Transfer is coated with a gloss medium.
It looks sharper than the one coated with Matte Medium below. Both versions have a place in my art. The right book page Image Transfer is coated with matte. It is still a little hazy looking because I did what does the air force do remove all the paper fibers.
However, it still has a quirky, faded charm about it. I prefer the look of the gloss as it gives a nice definition to any details in the image and it helps disguise any hazy areas. You can continue to work right over the images with paint or build more layers over the top.
No waiting is necessary. I added some shoe polish distressing to the edges of my book pages. Thank you for visiting The Graphics Fairy today! I hope you enjoyed playing with me in my Graphics Fairy sandbox! I hope you what causes dehydration in humans find dozens of ways to use this process!
Thank you…great technique and very clear instructions! I am getting that image and will try this technique in the peacock journal I want to make. This is so cool! Thank you for sharing! Is the paper you print the image on a special type of paper? Thanks what fitbit should i buy sharing! Does this only work on paper? Hi Carly, This should work on wood as well. It works on canvas, so I imagine it would work on painted wood.
Hi Janet. It is normal copy paper. Mine was 28 lb, because this is what Staples has in their machines. But 20 or 24 lb works great as well. Just remember it must be a laser print or toner copy to work for this technique.
I always wanted to do this technique. But, I am such a rookie. Do you glue the image down on paper and THEN run it through the ink jet printer? Or do you place the image on the printer tray and then run it through? Thank you. Hi Dee you use the laser print what is begging in tagalog the image to transfer to the book page. If I make a copy at a print shop, will that copy work in this process?
Pin Share. May joy be with you all. Browse around to find thousands of Stock Images that you can use in your projects or designs! Need more info about my site? Try my FAQ page. Seaside Junk Journal by Heather Naggy! Graphics Fairy Premium Membership ».
Comments I love your designs. I love vintage. I love the idea of a Peacock journal Heather! That sounds beautiful! Thank you Heather. Glad to know my instructions are understandable!
Dec 26, · Quickly lay the image face down into the wet medium. (left) Smooth with your fingers and then burnish with a edge of a scraper or old credit card. (right) You are trying to marry the image to the paper, so press firmly from the center to the edges in each direction. Always scrape from the Estimated Reading Time: 6 mins. Use the brayer, spoon and/or your fingers to transfer the ink from the film onto your coated paper by gently rubbing the back of the transparency Slightly peel up a corner of the transparency to check to see if the transfer is working - if not. With a pencil transfer, you have to rub comparatively hard to make the image transfer, but this ink will practically leap off the parchment paper without any help at all and will smear if you try to rub the image. Lightly press or pat the page to transfer the image. 5B. (Laser printers) Rub image.
The parchment paper option is quickly growing into one of the more popular ways of transferring an image to your carving block. And why shouldn't it? It's quick, it's easy and you probably already have everything you need to do it right at home! This method of transfer works best with line drawings—large colored areas tend to become blotchy. You might be able to make it work anyhow, but thin lines definitely work best. Carefully rub the image onto your carving block.
You are left with blank parchment. It's truly amazing. This image was provided by Wassa after rubbing the image onto his orange PZ Kut. Parchment paper is difficult to run through a printer since it's so slippery, but backed with a regular sheet of paper, it's not a problem, so we'll start by printing our image to a regular sheet of paper using an inkjet or laser printer. I use an inkjet printer in this tutorial, but I've been told it works just as well with laser printers.
We now know exactly where the parchment paper needs to be and how large it needs to be to cover the image. Cut a piece of parchment paper large enough to fit over the image and tape the corners down.
Make sure to orient the page in your printer so it will print on the correct side in the same location as before and change your printer settings to use a draft or normal mode.
Too much ink will make your transfer blotchy—when you print on parchment paper, a light touch of ink is needed. Wait for a minute or so for the ink to dry a bit before doing anything else with it.
Carefully lay down the parchment paper, printed-side down, on your carving block. The ink on the parchment paper is very wet so you won't have a chance to reposition the parchment paper after your image comes into contact with the carving block.
You can remove the parchment paper from the page you taped it to—the parchment paper is easy to see through and can make positioning the image on your carving block easier, but I find the parchment paper likes to curl in on itself is difficult to manage which is why I don't do that, but do what works for you! Another option might be to cut down the regular sheet of paper close to the parchment paper—then it still has the stiffness of the regular paper and it's small enough to position easily.
Carefully press the image on your carving block. Don't rub the back of the image! With a pencil transfer, you have to rub comparatively hard to make the image transfer, but this ink will practically leap off the parchment paper without any help at all and will smear if you try to rub the image. Lightly press or pat the page to transfer the image. Carefully remove your printout from the carving block so you don't smudge the image, and voila!
You're done! While designing a stamp, remember that the image you carve will be a mirror-image of what the stamp actually prints—which usually doesn't matter for photos but will be painfully obvious if you get it wrong with text! Fortunately, the process of transferring an image will reverse the text automatically for you.
In this photo, you'll see the words "Green Tortuga" has been reversed. This is what we want to see happen. Once the stamp is carved and can be used, the stamped image will reverse itself again and look correct. You'll also see that the text on the transfer is a bit blotchy. This method of transfer works best with thin line drawings and I was pushing things with the large, blocky text. There's just too much ink! I had set my printer to draft mode to use as little ink as I could, but it's still too much for large areas.