How to Turn a Hard Wire Light Fixture into a Plug In
Oct 08, · Undo the screw on the plug casing and open plug casing. Wrap wire around the screw 2. Wrap the hooked wire around one of the screws on the inside of the plug, and tighten the screw. Oct 10, · Hey fronds!! In this video tutorial, I'll show you JUST HOW EASY it is to turn any hardwired light fixture into a plug-in. All you need is a few supplies (to.
This post contains affiliate links for your convenience. Click here to read my full disclosure policy. This project is completely at your own risk, and I take no responsibility for any mishaps you may have as a result of this tutorial.
Please be careful and consult a certified electrician if you are in any doubt. For fixtures with grounding wires, you would want to use a three pronged cord and match up your three wires appropriately. Sometimes wires are color coded; if so, match up your colors. If not, most cords have a slightly ribbed side and a smooth side. Match up your wires: ribbed to ribbed and smooth to smooth if so. My fixtures included these awesome little terminal boxes which you connected by tightening the screws onto the wires.
I have not found these available online though I may just not be looking the right place! If using a similar terminal box, make sure your ribbed wires are facing each other and your smooth wires are facing each other.
If you connect using wire nuts, be sure your wire nuts are for the appropriate size wire standard lamps have 18 gauge wire… you can see it printed on the cord usuallytwist the wires carefully together white to white or smooth to smooth, etc.
Note: the main thing you want to ensure is that your white and black or your what is monomer and polymer and ribbed NEVER touch. If they do, they will short out your fixture when you plug it in. So be sure the entire wire portion that is not covered by plastic is enclosed in the terminal box or wire nut. Exposed wires are never a good thing! The only downside to this process that you now have cords obviously.
This step is not rocket science. All it takes is one cool little product I ordered from Amazon prime have I mentioned I really make use of my prime subscription?! So I got these great cord covers and cleaned it right up and the instructions on the package are so easy to follow! It only took about 3 minutes!
Since my walls are white, I left them alone, but they are paintable if you have colored walls. Both by the bed in the nook by the window…. And the nook that we recently planked. Does it make sense to hire an electrician to rewire something there not even centered on her room?
Not really, but I could just hang it and hide the cord until we redo her room some day and no longer want it, right? I love the possibilities this offers! I know they make some sconces and chandeliers that already have plug in cords, but naturally, I fall in love with the ones that are hardwired.
And now you can, too. What do you think? Where would you like to put one? I, too, always fall in love with hardwired light sconces. I am so thrilled that I came across your tutorial today. I have verizon - how to block calls few places in my home where I would like to change things up : Where did you get your vintage accordion light sconce? These were from Decor Steals several months ago. Hope this helps!
I found the light on TjMaxx. I had a friend that asked me about this — but wants to do it with a chandelier. I will send her over, great post by the way. I love your creativity and attacking the electrical situation!! I purchased a beautiful vintage chandelier at an estate sale at a Dallas condo, but I am afraid to hang it as I feel it needs to be rewired…. I think I could possibly do this myself??
Any suggestions? Thanks, GW. Thank you so much, Glenda! I hope you are able to find someone! Unfortunately, I was unable to how to convert hardwire to plug in connectors like this online mine came with the lampbut a regular wire nut of the appropriate size should accomplish the same thing.
I hope this helps! Thanks for posting this! I think the safest thing to do is to look for a plug that has a grounding wire. This is such a great tutorial- thank you! My fixture that I converted today has a ground wire.
I asked an electrician and he told me it would be totally fine to just cut it off. Hi Rachel, Do you have a tutorial on how to do the opposite? I have a plug in lamp I want to hard wire above a sink. If not here, maybe you can point me in the right direction? Hi Danielle, actually the opposite is simply to cut off the plug and strip a short portion of wires.
I have a hardwired pendant fixture that I plan to convert. If the cord is too short to reach an outlet, may I replace the cord with a longer one? Thanks for this — I loved he tutorial. Can you correct them? I found one of the acordine part on the wall in our cellar mounted on a pole. My uncle saw it and said it from an antique phone that would mount on it. So now you gave me a project to do with it. Thank you. Super clear and helpful tutorial! Was hoping you could confirm something — do the arms on these sconces move left and right?
How funny! So glad you found it helpful. The arm only technically comes how to use ball joint separator fork and in, not side to side, but the actual head of the lamp pivots a little at the end of the arm; does that make sense? Totally makes sense! Thanks, Rachel! Based on your 1st picture, it looks like the light arm swivels over to the right. Hey there — Thanks for the how-to!
I was googling how to convert a hard wired light fixture to a plug in light fixture when I come across your post. Thank you! This post was perfect for me. I bought a medicine chest at Home Depot that said something about a plug on the box. I bought it thinking it plugged in. Nope — it meant there was an outlet inside as well as the lights on top and it was hard wired.
I really liked it so I picked what family is europium in an extension cord with a ground so it matched up. Thanks for sharing. I was feeling defeated when i saw that it needed to be hard-wired. Off to the hardware store now…. Great tutorial and tips. What do you do with the ground wire? Do you have to use a what ive been waiting for lyrics pronged plug? Thank you!!
Apologies for the slow reply. I do think there are ways to ignore the ground wire, but I would be more comfortable just using a three pronged plug if your fixture contains a ground wire. Great tutorial! My only question is: this specific mirror has touch screen type buttons on it to power the lights on and dim them and such… will all these features still be working if I follow your tutorial to make the mirror a plug-in instead of hardwire?
Hi Brittany! You can always try and see if they function correctly. I have very similar lights but they are plug in. How did you mount these? Ours have two holes on the back to receive screw heads — one in each of the top corners. It took some precise measuring, but once the screws were in the right place, the entire light was able to slide onto those screw heads and remain secure. I hope you are able to figure out a solution for yours!
Installing and Converting a Hardwired Range Hood to Plug-In
Because the cords were wrapped in fabric, we cut down the fabric as far as possible and then wrapped it several times with electrical tape. After all fabric + junction box = fire hazard. Next the hubs connect the wires and that was that. All-in-all it took about 30 minutes to complete the project.
Every once in a while, I am looking for a pendant light and I find the perfect one…only to realize that it is supposed to be hard-wired and I want to be able to plug it in to an outlet.
Want to see the bedroom where this pendant was used? Click here to go to the post. Non-Polarized Angle Plug. Lamp cord switch optional. I like this plug design because the wires are screwed onto the casing. This is a more secure design than some of the plugs that are available…if someone happens to pull the cord, the plug should stay attached.
Wrap the hooked wire around one of the screws on the inside of the plug, and tighten the screw. This type of switch works better than than the little ones with the rotating wheel because the wiring is securely attached to the switch…in my experience the little rotating wheel switches are difficult to install and do not always work consistently.
Cut one of the wires in the location where you want the switch to be. Strip both ends of the cut wire, twist it and make a hook in the wire similar to step 2 above. Feed the non-cut wire through the other side of the switch.
Then make sure the wires on both ends line up with the open slots at each end of the switch casing. Hang the light fixture from the ceiling with a hook. Hi Susie…I just cut it off. And to think I paid the lighting store to make the conversion! How do you lengthen the cord? Your instructions are very precise.
I have not tried lengthening the cord on any of the ones I have done. You could take a look at how the wire is connected to the fixture itself and see if it can be replaced easily. Your email address will not be published.
Notify me via e-mail if anyone answers my comment. Username or Email Address. Remember Me. From House To Home. Entertaining Diva. Blogging Resources. How To Convert a Hardwire Fixture To a Plug In Pendant Every once in a while, I am looking for a pendant light and I find the perfect one…only to realize that it is supposed to be hard-wired and I want to be able to plug it in to an outlet. Click Next to find out how to convert a hardwire fixture to a plug in pendant.
What You Need This post may contain affiliate links. We make a small commission if you buy the products from these links at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases. But we only recommend products we would use ourselves. For more information, click here to see our disclosures. Thanks for the tips, Joan! What do you do with the ground wire? My lamp had a extra wire coming through the chain.
Leave a Reply Cancel reply Your email address will not be published. As Seen On. Search for:.